DTE220 Mechanical safety edge, 2m long

SKU
DTE220
£69.60 £58.00

Mechanical safety edge. The DTE220 is 2m long but can be cut down to suit. The soft rubber edge responds to front and side pressure.

  Parameter      DTE220
   Length     2m
   Section     35 x 75mm
   IP rating     IP54
   Output     N/C or 8K2
   Switch point     15mm

 

DTE safety edges are mechanical activation enclosed in a soft rubber extrusion. Mechanical edges are more rugged than resistive edges, but have a higher switch point. They are suitable for fast moving edges such as the end of a sliding gate.

The edge responds to front pressure and side force. These taught wire edges have three mechanical micro-switches, two for activation and one for wire failure. The wire must be kept at the correct tension. 

DTE connects on two terminals. Place the jumper link near the terminals for "normally closed" output, or away from the terminals for  "8k2" output. 

The DTE should be mounted withe the terminal end at the top to prevent water ingress.